Pedestal Paver Supports
Tile Tech Pedestal System is designed for concrete pavers, porcelain pavers or IPE deck tiles to lay level over a built up roof. Our PATENTED Hybrid screw-jack pedestal support system is a innovative product, allowing for self leveling, single model for all height applications, screw adjustable, PVC pipe adjustable and are stack-able. The substrate can be either concrete or wood structure, with a roof membrane over the top.
Raised Decking Applications
Tile Tech Pedestal systems can be used in a wide variety of applications including, elevated decks, raised decks, tile decks, wood decks, porcelain decking, and sloped or level rooftops. Additionally, balconies, patios, urban parks, plaza decks, rooftop terraces, water features and walkways, and general landscaping are areas where pedestal systems excel.
Although most commonly used to support unit pavers – porcelain, concrete, stone or structural wood pavers – they can also support wood joists to construct traditional wood plank decks.
For elevated decks using modular pavers, the pavers are supported only at each corner, additional pedestals can be added under the center or midway along the edge of a paver, depending on the paver size and anticipated loading.
Raised Paver Application
All our Pedestal Paver System products, including our standard and hybrid adjustable pedestals, create level rooftop decks over sloped surfaces. Tile Tech pedestals elevate and support Wood Tiles, Concrete Pavers, Porcelain Pavers, and a variety of other surfaces when sophisticated, commercial grade decking is required.
Single Model Design
Allows for all height applications from low as 1/2” and as high as 24” resulting in reduced labor and material cost. Eliminates leftover parts and pieces!
Allows the pedestal system to vary in heights up to 24+ inches by using off-the-shelf 4”ø SDR-35 PVC pipe available everywhere. Eliminates material & shipping cost!
Allows for quick and easy fine height tuning for an additional 3/4” , 1-1/2” & 4″ depending on model size of UNI-INSERT™ used. Eliminates having to cut pipe exactly!
Allows for slope compensation of 0% to 4% in any direction. A T-Handle tool will allow for raising & leveling while loaded with pavers. Eliminates having to remove pavers to make adjustments!
Allow for minor height adjustments from 1/2” up to 2” and can compensate for slopes of 0% to 3% by aligning the built-in slope compensator of one cap relative to another. Simple, easy and affordable!
Screw-Jack Adjustable Pedestal
Our Adjustable Deck Pedestal System can be configured to be used with off-the shelf PVC pipe or special 4″ male/female couplers or stack-able caps. The off-the-shelf, 4.215” diameter SDR-35 PVC sewer pipe allows the pedestal system to vary in height up to 36+ inches and is cut to the desired height using 12” chop saw. The screw adjustable 4″ Uni-Coupler can also be used in lieu of any PVC pipe and will allow height build up of 24″. Additional low-height stack-able caps with built in slope compensation are available for height ranges of 1/2″ to 2-1/4″ high. Our pedestals paver system includes built-in self-leveling with additional slope compensation plates at the bottom of the pedestal system.
Adjustable Pedestals + PVC Pipe
Adjustable Pedestals + Coupler
Deck Pedestals + Joist Cap
Low-Height Pedestal – Stack Cap
Our Hybrid Pedestal™ System consists of 7 standard components and off-the-shelf, 4.215” diameter SDR-35 PVC sewer pipe. The PVC pipe allows the pedestal system to vary in height up to 36+ inches and is cut to the desired height using 12” chop saw. The Uni-Base is then “press fit” on to one end of the PVC pipe and a Uni-Collar on to the other end and requires no gluing or other attachments. Either 3/4”, 1-1/2” & 4″ Uni-Insert is then screwed in to the Uni-Collar allowing for fine height adjustments. The assembly is completed by aligning and locking the Uni-Cap with the Uni-Insert. The Uni-Cap features include built-in self-leveling and removable 1/8” spacer tabs for proper paver spacing and joint alignment.
Spacer – 1/4″ / 6mm
Spacer – 1/16″ or 2mm
Lock Disk – IPE Tiles
Lock Disk – Hex Tray
Rubber Shim – 1/8″
Base Slope Plate – 2% Each
Joist Plate – 1/8″
Bracing Flange Base
Paver & Tile Options
Tile Tech Pedestal System is designed for concrete pavers, porcelain pavers or IPE deck tiles to lay level over a built up roofs & rooftop decks. Our PATENTED Hybrid pedestal support system is a innovative product, allowing for self leveling, single model for all height applications, screw adjustable, PVC pipe adjustable and are stack-able. The substrate can be either concrete or wood structure, with a roof membrane over the top.